main_images
Rear extension drawings for a Whetstone semi

Lofts, Extensions and Remodelling for 1930s Semis and Detached Homes

Most Whetstone houses were built between the wars, with hipped roofs, side passages and long gardens.

That gives plenty of room to grow, but each change has to suit Barnet Council’s planning rules, the neighbours on either side and, in Totteridge, the conservation area. We design with all three in mind from the first visit.

At London Renovation Company, designs are drawn by an ARB-registered architect, checked by our structural engineer and then priced and built by our own team, so what is drawn is what gets built.

Have the House Looked Over Before Anything Is Drawn

Contact Information

Tell us what you would like to add or change. Our architect visits, looks at the roof, the boundaries and the neighbours’ windows, and explains what is likely to be allowed.

    Whoever Draws It Also Prices and Builds It

    Measured plans of a 1930s house
    Architect and builder reviewing drawings

    Because the same company draws, prices and builds, design choices are costed as they are made. You see what a wider opening, a larger dormer or a different roof shape adds to the price before the drawings are fixed, not after the planning decision.

    Architect and builder reviewing drawings

    Our design service covers:

    • Measured survey and existing plans and elevations
    • Planning, prior approval and Lawful Development Certificate applications to Barnet Council
    • Building Regulations drawings with structural calculations
    • Party wall notices arranged with your neighbours on your behalf

    We work across N20, from Totteridge Lane and Oakleigh Park to the streets either side of the High Road.

    Converting Hipped Roofs Into Usable Top Floors

    A hipped roof slopes on all sides, so on its own it gives little standing room. Most Whetstone lofts start by turning the side slope into a vertical gable, then adding a dormer at the back.

    Hip-to-Gable and Rear Dormer Within 50 Cubic Metres

    On semi-detached and detached houses, permitted development allows up to 50 cubic metres of extra roof space without a planning application, provided the ridge is not raised and dormers stay off the front slope. We measure the volume precisely so the design stays within it.

    Lofts That Fall Outside Householder Allowances

    Houses in the Totteridge Conservation Area, flats, and designs larger than the allowance need a planning application. We prepare the drawings and a design statement explaining how the roof suits the street.

    Hip-to-gable loft conversion in Whetstone
    Houses in the Totteridge Conservation Area

    Totteridge’s Protected Streets and Lanes

    Barnet’s Totteridge Conservation Area includes around 450 properties in N20. Here the council looks closely at how any change affects the character of the area, and several permitted development rights are reduced.

    Extra Scrutiny for Roofs, Fronts and Trees

    In a conservation area, roof extensions and side extensions need planning permission, and work to trees needs six weeks’ notice to the council first. We design with materials and proportions that match the house and street, which gives an application the best chance.

    Making Room Without Overshadowing Next Door

    On close-set semis, the effect on next door decides the shape of most extensions.

    The 45-Degree Line From a Neighbour’s Window

    Planning officers use it to judge whether a neighbour’s window will lose too much daylight.

    Rights to Light Under Property Law

    A private legal right, separate from planning, which a neighbour can still enforce after approval.

    Roof Shapes That Keep Extensions Low

    Sloping or stepped roofs near the boundary reduce the bulk next door sees.

    For the building work itself, see house renovation in Whetstone.

    How a Whetstone Design Progresses

    Each project follows five stages:


    01.

    Measuring Every Room and Roof Pitch

    A full measured survey of the house, roof and boundaries.

    02.

    Concept Options Discussed

    Two or three layouts, each with an approximate build cost.

    03.

    Lodging the Application

    Planning, prior approval or a Lawful Development Certificate, as the design requires.

    04.

    Details the Builders Work From

    Building Regulations drawings and the engineer’s calculations.

    05.

    Passing the Drawings to Site

    Our own team builds from them, with the architect available throughout.

    Architect’s plans on site Loft conversion under construction in N20

    Councils have eight weeks to decide most householder applications, so the design stage usually starts two to three months before the planned build date.

    Three Projects Whetstone Families Ask Us to Draw

    Interwar houses in N20 lend themselves to a few kinds of change.

    Wrapping Round the Back and Side

    A single-storey L-shaped extension giving a large kitchen-diner and a utility room.

    Two Floors Over the Side Passage

    A two-storey side extension adding a bedroom above and space below, set back to suit the street.

    Garden Rooms and Studios

    An insulated outbuilding for work or hobbies, sized and positioned to suit the outbuilding rules.

    Elsewhere on Our Site

    House extension design in North London

    Nearby

    Nearby Architect Pages

    We also design homes in North Finchley, Finchley and Southgate.

    Finished extension in Whetstone

    Build

    Turning Approved Plans Into Rooms

    Once drawn, the new rooms are fitted out by our team: kitchens, bathrooms and flat renovation in Whetstone.

    Asked Before Drawings Begin

    Often, yes. A loft conversion on a semi-detached or detached house can usually be built under permitted development if it adds no more than 50 cubic metres, does not raise the ridge, keeps dormers off the front roof slope and uses materials similar to the house. Homes inside the Totteridge Conservation Area, and all flats, lose these rights, where a planning application is needed.

    A Lawful Development Certificate is a formal confirmation from Barnet Council that a loft or extension built under permitted development is lawful. It is optional, but buyers’ solicitors and mortgage lenders often ask for one when you sell, and it removes any doubt before building starts. Our architect puts the application together and lodges it alongside the plans.

    Built out at the back on one floor, a semi may project up to 3 metres under permitted development, or 4 metres on a detached house, subject to height and boundary limits. Through the prior approval scheme, where Barnet consults the neighbours, this rises to 6 metres for a semi and 8 metres for a detached house. Two-storey and side extensions in a conservation area need planning permission.

    Planning and right to light are separate. Barnet’s planning officers judge daylight using guidelines such as the 45-degree line from a neighbour’s window. A right to light is a private legal right, usually gained after 20 years of uninterrupted light, which a neighbour can enforce even after planning permission is granted. Where a design is close to a neighbour’s window, we check both and advise if a specialist assessment is worth getting.

    Yes. Our designs are produced by an architect registered with the Architects Registration Board (ARB), which is the legal requirement for anyone using the title “architect” in the UK. Our structural engineer works on the same drawings, and our own building team prices and builds them.

    Councils in England have a statutory target of eight weeks to decide a householder planning application, with the clock starting once the council accepts the application as valid. Prior approval for a larger rear extension has a 42-day period. We allow for both when planning a start date.